Schwinn Rascal Plus - Page 12

❹ Insert the washers over the end of each bolt that has just been
inserted in step 3.
❺ Insert the nuts over each bolt and ghten the bolts using an
adjustable wrench. Place the liner back into the trailer.
Figure 3.12
TIP! Remove the protecve liner to perform this step.
❷ Working from the interior of the trailer Insert a washer onto
each axle bolt.
❸ Insert the bolts down through the trailer frame and out
through the axle Figure 3.11
9 Schwinn Rascal Plus Pet Trailer
Figure 3.12
2
3
Figure 3.11
3
2
5
5
4
4