INSERT THE SAFETY FLAG
Important! The safety ag is an important safety feature that
warns others that a trailer is present and on the bicycle.
Always have the safety ag on the trailer when in use.
❶ Insert the top half of the pole into the opening of the boom
half of the pole.
❷ Insert the ag pole into the ag pole sleeve. Figure 3.16
❹ Insert the locking pin into the hole on the end of the axle and
slide the end of the safety loop over the end of the locking pin.
Check that the locking pin is securely in place. Figure 3.15
11 Schwinn Rascal Plus Pet Trailer
Figure 3.15
1
2
Figure 3.16
4
4
To Next Page
Loading...
