2.0 Packing List
|
3
2.0 Packing List
I
f the outside of the shipping packaging is damaged, notify your shipping
department immediately. The shipping department may wish to notify
the carrier at this point.
If the shipping carton is not damaged, carefully remove and identify all of
the components as listed below. If any of items are missing, contact
Scientifica Ltd. Please retain the packaging for storage or future
transportation of the system.
2.1 Standard items
1
x MMBP top plate (See Figure A for image)
2 x Protective rubber membranes
1 x Screw kit
1 x Hex key set
1 x Mains lead
1 x LinLab software CD
And:
Quantity
1 x Motorised Stage
(identified by flying leads)
1 x ‘Slave’ Stage
3 x Mounting Carriages
(Either metric or imperial tapped holes, to match
the top plate supplied)
1 x Break out box
Continued…
To Next Page
Loading...
