EasyManua.ls Logo

SCIFIT PRO2 - Foot Crank Adjustment

SCIFIT PRO2
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ACCESSORIES
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
20
12V Power Pack - #P1562 (Dom.) #P3733 (Int’l)
To provide continuous power to the display when
equipment is not in operation, plug in the 12V power
pack into the jack located on the lower front side of
monocoque frame.
High Support Boots - #A2242 (Optional)
A plastic calf high boot which is open at the front and
has Velcro straps to keep the legs in place. They come
with the crank bars for easy installation and removal.
Low Support Boot - #A3248 (Optional)
Footplate with a lip at the back to keep the feet from
sliding off the pedal. Open at the front and has Vel-
cro straps to keep the feet in place. They come with
the crank bars for easy installation and removal.
Tie Downs - #P2506 (Optional)
The tie downs are adjustable straps with clips on
each end. They fix to the wheelchair on the PRO1,
PRO1000 or PRO2 at the front cross tube. The footrest
must be removed to expose the tie down anchors.
Order online 24/ 7 at w w w .SCI FI T.com

Other manuals for SCIFIT PRO2

Related product manuals