Scion Instruments 456-GC - 120 Tools Required

SCION Instruments
436-GC/456-GC Service Manual Revision B February 2019
Page: 11
436-GC/456-GC
120 Tools required
The following tools are required to perform the service procedures described in this manual.
• Electrostatic discharge (ESD) protective wrist strap, CP737948
• Set of 8pc Screwdrivers ,SOGSDDX50K
2x Philips screwdriver PH1 x100
PH2 x125
6x Screwdrivers 0,6 x 3,5 x75
0,6 x 3,5 x100
0,8 x 4,0 x100
1,0 x 5,5 x100
1,2 x 6,0 x150
1,2 x 8,0 x175
• Screwdriver Torx T-20, CP69024
• Screwdriver Torx T-10, CP69023
• Screwdriver long, Torx T-20 ,CPTOOL0072
• Screwdriver long, CPTOOL0002
• Septum Pick, 7200008400
• Wrench ¼” x 5/16”, CP8451
• Wrench 7/16” x ½”, CP8452
• Wrench 3/16” x ¼ , VLOEW1
• Magnifying Scale, CP10405
• Ceramic scoring wafer,190015800