Need help?Do you have a question about the Scotsman MV21 and is the answer not in the manual?
Details specifications and ice making capacity for the MV12 model.
Machine specifications and dimensions for MV12 models (Air/Water cooled).
Details specifications and ice making capacity for the MV 21 model.
Machine specifications and dimensions for MV 21 models (Air/Water cooled).
Details specifications and ice making capacity for the MV 32 model.
Machine specifications and dimensions for MV 32 models (Air/Water cooled).
Details specifications and ice making capacity for the MV 50 model.
Machine specifications and dimensions for MV 50 models (Air/Water cooled).
Provides specifications and step-by-step procedures for installation, start-up, and operation.
Covers location selection, space for ventilation, and utility connections.
Details bin compatibility, refrigerant type, and standard leg specifications.
Specifies minimum and maximum limits for air/water temperature and pressure.
Criteria for selecting a suitable installation spot, ensuring utilities and space.
Instructions for lifting the icemaker onto the bin and securing it.
Installation of air separator and removal of shipping materials.
Procedures for stacking one machine on top of another.
Details water supply type, pressure, clarity, and purity requirements.
Specifies requirements for sump and condenser drains for different model types.
Instructions for connecting power supply and ensuring proper wiring.
Emphasizes neutral wire and earth ground for safety and preventing damage.
Covers cabinet level, location, clearances, and connections.
Checks water supply pressure, electrical wiring, and grounding.
Verifies compressor mounting and refrigerant line integrity.
Ensures owner receives manuals, support info, and registration card.
Removing panels, opening water supply, and filling the sump.
Turning on power, checking LEDs, compressor, and fan operation.
Verifying water pump operation and adjusting ice cube size.
Notes on ice plate formation, water quality, and safety timers.
Ensures proper water conductivity and checks bin-full shut-off.
Reinstalling panels and explaining operation to the owner.
Schematic of the refrigeration system during the freeze cycle.
Describes how refrigerant flows and cools the evaporator.
Explains the mechanical float valve and water pump operation.
How hot gas bypass melts ice and releases cubes.
Operation of the water drain valve and sump flushing.
How magnetic switches and ice sensor initiate the freezing cycle.
Triggers for harvest cycle, ice release, and control board actions.
How the machine stops when the bin is full or due to sensor failure.
Details reservoir level, ice sensor distance, and safety switch settings.
Provides normal operating pressures and temperatures for different models.
Specifies refrigerant charge amounts for air and water-cooled models.
Explanation of LED indicators and their meanings on the console panel.
Details the role of the PC Board and its connectors/jumpers.
Describes the compressor contactor and ice thickness sensor functions.
Explains magnetic switch signaling and hot gas solenoid valve operation.
Details condenser temperature sensing and high-pressure safety control.
Describes water regulator valve, distribution, and drain solenoid valve.
Explains the thermostatic expansion valve and water pump functions.
Steps for removing and replacing the water pump and reservoir.
Procedures for distributor, outlet valve, and compressor removal/replacement.
Steps for removing and replacing condensers (air/water) and hot gas valve.
Instructions for removing and replacing the refrigerant drier.
Procedure for removing and replacing the water regulating valve.
Steps for removing and replacing the thermostatic expansion valve.
Instructions for removing and replacing the evaporator plate assembly.
Procedure for removing and replacing the fan motor or blade.
Diagnosing issues when the machine does not run and LED indicators.
Diagnosing problems when the compressor is not running or runs slowly.
Diagnosing issues with ice thickness, water quality, and harvest.
Diagnosing low ice capacity due to pressure, compressor, or condenser issues.
Diagnosing irregular ice formation due to water supply or refrigerant issues.
Recommended maintenance frequency for icemakers and bins.
Checks for water treatment, strainer, level, and leaks.
Procedure for cleaning and sanitizing the ice storage bin interior.
Instructions for cleaning the unit and bin exterior surfaces.
Detailed steps for cleaning the ice maker using cleaner solution.
Procedure for rinsing the system and checking ice quality after cleaning.
General| Dimensions (W x D x H) | 330 x 560 x 800 mm |
|---|---|
| Electrical | 220-240V, 50Hz |
| Condenser Type | Air-cooled |
| Ice Production | 21 kg/24h |
| Power Supply | 220-240V, 50Hz |
| Dimensions (H x W x D) | 800 x 330 x 560 mm |
To Next Page
