10 scott-sports.com 11
GENIUS
BIKE OWNERS MANUAL
10 scott-sports.com 11
GENIUS
BIKE OWNERS MANUAL
ENGLISH
For the assembly of the remote control of the front fork lock-out 2 different
changeable cable rolls are existing.
The different roll for the pull of the fork remote cable can be changed within few
minutes to adapt the lever to your fork model/brand.
You will see on the downside of the roll the indication of the fork brand or the fork
model.
You have 3 positions of the TWINLOC XL remote lever.
1. LOCK OUT MODE:
the shock is locked; climbing on asphalt roads is now possible without any power loss.
Simultaneous a blow-off-system prevents the shock being damaged in case the rider
did not open the system while crossing obstacles.
2. TRACTION/RIDE MODE:
For Traction: by reducing the internal chamber volume inside the shock the travel of
the shock will be reduced to around 60% (approx. 100/90mm) the characteristic of
the air spring gets harder. This results in climbing without “bobbing” and offers still
optimum traction of the rear wheel.
For Ride: by adding a platform on the compression damping system the shock will not
bounce while standing on the pedals
3. DESCENT MODE:
full travel of 150/130mm (27.5”/29”)
You will find the following positions on the remote lever:
Scott offers 2 different TWINLOC XL levers with following fork/rear shock
combinations:
- Nude 2 with different rolls for FOX CTD fork and RockShox DNA 3 fork (Scott Article
number: 230097)
- DT M3 with different rolls for FOX CTD fork and RockShox DNA 3 fork (Scott Article
number: 230098)
Please kindly note that the cable roll of a RockShox DNA3 or FOX CTD fork-lever is
not interchangeable with the regular rolls of 2 step forks. You need to use another
lever!
For more details please contact your authorized Scott dealer.
To Next Page
Loading...
Need help?
General
