18 scott-sports.com 19
GENIUS
BIKE OWNERS MANUAL
18 scott-sports.com 19
GENIUS
BIKE OWNERS MANUAL
RECOMMENDED TOOLS FOR THE SHOCK SET-UP
For the set-up of the shock we recommend to use a shock pump with a scale up to 20
bars/300 psi with a special air valve connector preventing from air getting away while
removing the pump from the shock valve, this will result in an exact air pressure.
5. Fix it by squeezing it with pliers.
Please note that air will flow into the hose and indicator when counterchecking the air
pressure, so you have to set up again the recommended pressure after this action.
Make sure to balance at least this air loss when you make a check of the air pressure of
the shock. Pls also note that the indicators of shock pumps have a tolerance of max.
10%.
BASIC SET-UP OF THE TWINLOCXL REMOTE
CONTROL OF DT M3 SHOCK
The assembly of the remote cable and the setup of the M3 rear shock is very similar to
the abovementioned assembly and setup of the Nude2
For more details on the DT M3 please follow the details shown in the manuals of DT
Swiss attached to this bike.
ENGLISH
To Next Page
Loading...
Need help?
General
