SCOTT GENIUS LT - Technical Data Genius LT; Geometry Chip

GENIUS LT
6 2011 SCOTT BIKE OWNERS MANUAL
GENIUS LT
7
ENGLISH
TECHNICAL DATA GENIUS LT GEOMETRY CHIP
Travel 185/110/0mm
Suspension Ratio 2.85/1.69/0
Piston stroke 65 mm
Shock length (Eye to Eye) 180mm
Shock Hardware Mainframe 14mm x 6mm,
Shock Hardware Linkage 14mm x 6mm,
Seatpost diameter 31.6mm
Headset 1 1/8” /1.5”, tapered, cups semi-integrated, 50-61mm cup OD
Fork travel 180mm
Fork length 565mm
BB housing PF BB 92, 73mm, depending on model
Front derailleur Shimano E-type / SRAM DM S3
Rear Hub Width 135mm, 142mm, depending on model/dropout system
Max tire width 61mm/2.4”
Bearings 4 x 6802/ 2 x 61800/ 2 x 6803
Chainguide Alloy frame: ISCG 05,
carbon frame: with adapter ISCG
With the help of the Geometry Chip you will be able to adjust your BB height above
ground in 2 positions:
- Low BB: lower center of gravity over ground, slacker/ more relaxed headangle
- High BB: bigger clearance between pedals/cranks and obstacles on the ground,
steeper headangle
0.7° 0.7° 8 1 80.3 0.04 0.3
° ° mm mm mminches inches inches
Eect of Changing
from
LOW to HIGH
Head Angle Seat Angle BB Oset Standover
Height
BB Height
J_genius_lt_en.indd 6-7 06.08.10 16:30