SCRAM Systems GPS-600 - Install SCRAM GPS Bracelet; Pre-Installation; Bracelet Installation

SCRAM GPS
Quick Reference Guide
6
6
6
6
6
6
6
The selected recipients now appear in the Assigned
Recipients By Account ID fi eld.
NOTIFICATIONS
To select the events that will result in a notifi cation being
sent to designated individuals:
1. Select the Notifi cations tab.
2. Select an individual in the User/Recipient drop-down
list.
3. In the Critical, Serious, Warning, and Message panels,
select the appropriate Text Message and/or Email
check boxes.
4. Click the Save button.
INSTALL SCRAM GPS BRACELET
PRE-INSTALLATION
1. Connect the external charger by sliding the terminal
into the housing slot. AMS Best Practices for charging
recommend that the device be charged until the
Green light stops blinking.
• Charging - Flashing
Green Light
• Charge Complete - Solid
Green Light
2. Ensure that the teeth on the back plate are not
missing or damaged.
3. Ensure that the indicator lights on the bracelet
are facing up and are visible by the offender while
wearing.
4. Note the proper orientation of the back plate on
the strap prior to wrapping the strap around the
offender’s ankle.
BRACELET INSTALLATION
To install the bracelet on the offender’s lower leg:
1. Place the back plate fl at against the offender’s lower
leg.
2. Wrap the bracelet around the leg to overlap the loose
end.