ScreenBeam
®
|
1100 Plus
screenbeam.com | 13
5.
The browser may give an error stating “The connection or site
is not secure or private.” Manually accept the connection as
follows:
z Chrome browser: click Advanced, then click Proceed.
z Edge/IE browser: click Details, then Go on to the webpage
(not recommended).
z Firefox browser: click Advanced, then click Add Exception,
then click Confirm Security Exception.
6.
When the ScreenBeam management page appears, enter the
z Username Administrator.
z Password screenbeam (both case-sensitive).
Method 2-Network Connection via DHCP
1.
Using a shielded RJ-45-terminated Cat5e or better
Ethernet cable, connect the ScreenBeam Ethernet port to a
DHCPenabled network.
2.
The Ready to Connect screen on the display will show the
assigned IP address of the ScreenBeam. Enter this address into
the web browser of a PC or Apple device on the same network
as the ScreenBeam.
z Follow the directions from Method 1, steps 5 and 6 if you get
a browser error.
To Next Page
Loading...
