Need help?Do you have a question about the ScreenBeam 960 and is the answer not in the manual?
General| Model | ScreenBeam 960 |
|---|---|
| Category | Receiver |
| Wireless Standard | 802.11ac |
| Video Output | HDMI |
| Resolution Support | Up to 4K UHD |
| Network Connectivity | Wi-Fi |
| Power Supply | 5V/2A |
| Maximum Resolution | 3840 x 2160 |
| Wireless Security | WPA2 |
| Ports | HDMI, USB, Ethernet |
| Frequency Band | 2.4GHz, 5GHz |
| Latency | Low Latency |
| Wireless Technology | Miracast |
| Compatibility | Windows, Android, macOS |
| Audio Support | LPCM |
Outlines network prerequisites, including Ethernet and wireless specifications, and required ports.
Details how to establish wired and wireless network connections for the receiver.
Provides instructions on connecting devices using the Wi-Fi Miracast protocol.
Guides on connecting devices via an existing network infrastructure.
Introduces ScreenBeam Central Management System for deployment and administration.
Explains accessing the Local Management Interface (LMI) for configuration.
Guides on connecting to LMI via direct P2P connection using the AGO mode.
Details accessing LMI via a LAN connection using DHCP.
Explains accessing LMI via the receiver's local Wi-Fi network.
Sets the CMS server address and communication port for the receiver.
Instructions for updating the receiver's firmware wirelessly via LMI.
Instructions for updating the receiver's firmware using a USB flash drive.
Steps to reset the receiver to its original factory default settings.
Provides solutions to common problems encountered with the ScreenBeam 960.
Answers to frequently asked questions about the ScreenBeam 960.
To Next Page
