48
2. Go to the Wireless display over LAN section, and set Mac OS or Windows 7 to
Enable or Disable.
Enable: Mac OS or Windows 7 devices are allowed to project over the local network
with ScreenBeam SBCast app. By default, this feature is enabled.
Disable: Mac OS or Windows 7 devices are not allowed to project over the local
network with ScreenBeam SBCast app.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
5.3.2.3 Setting up Native Screen Mirroring for macOS/iOS Devices
The Wireless Display over LAN feature allows macOS/iOS devices to project over the local
network with native screen mirroring.
ENure the following requirements are met:
Operating system: macOS or iOS
100M/1000M Ethernet adapter (optional, but recommended) and Wi-Fi adapter are
available
Stable local area network
MacOS/iOS device and ScreenBeam 960 receiver are connected to the same LAN
Required ports: UDP 5353, TCP 47000, TCP 7000, TCP 7100, TCP 18000-18009
•
UDP 5353, for Multicast DNS (mDNS) discovery
•
TCP 47000, for Airtune in AirPlay
•
TCP 7000, for AirPlay by passing URL
•
TCP 7100, for AirPlay mirroring
•
TCP 18000-18009, for macOS and iOS AV data
To Next Page
Loading...
