ScreenBeam 960 - FAQs

94
FAQs
Can I view protected content if ScreenBeam 960 receiver is connected a display
through the VGA port?
No. The VGA port does not support playback of protected content such as blue-ray.
Can my device connect to ScreenBeam 960?
To connect to ScreenBeam 960, your device must be Wi-Fi Miracast-capable.
For a system to support wireless display, it should have most if not all Intel chipsets
(Processor, Graphic Card, and Wireless chipset).
 Processor. One of the following processors is required:
• 2nd generation Intel Core i3/i5/i7 Mobile Processor
• 3rd Generation Intel Core i3/i5/i7 Mobile and Desktop Processor
• 4th Generation Intel Core i3/i5/i7 Mobile and Desktop Processor
• Intel Pentium N3510 Processor
• Intel Celeron N2805 Processor
• Intel Celeron N2810 Processor
• Intel Celeron N2910 Processor
• Intel Atom Z3740 Processor
• Intel Atom Z3740D Processor
• Intel Atom Z3770 Processor
• Intel Atom Z3770D Processor
 Graphics. One of the following graphics solutions is required:
• Intel Iris Pro Graphics 5200
• Intel Iris Graphics 5100
• Intel HD Graphics 5000
• Intel HD Graphics 4600
• Intel HD Graphics 4400
• Intel HD Graphics 4200
• Intel HD Graphics 4000
• Intel HD Graphics 3000 (mobile)
• Intel HD Graphics 2500
• Intel HD Graphics 2000 (mobile)
 Wireless Adapter. One of the following wireless adapters is required:
• Intel Centrino Wireless-N 1000, 1030, 2200, or 2230
• Intel Centrino Wireless-N 2200 for Desktop
• Intel Centrino Advanced-N 6200, 6205, 6230, or 6235
• Intel Centrino Advanced-N 6205 for Desktop
• Intel Centrino Wireless-N + WiMAX 6150
• Intel Centrino Advanced-N + WiMAX 6250
• Intel Centrino Ultimate-N 6300
• Intel Dual Band Wireless-N 7260