ScreenBeam 1100 Plus User Manual

ScreenBeam 1100
Plus
Wireless Display
Receiver
Firmware 11.1.8.0
User Manual
V1.1
For Catalog # SBWD1100P

ScreenBeam 1100 Plus Specifications

General

Wireless Standard	802.11ac
Video Output	HDMI
Miracast Support	Yes
Frequency	2.4GHz and 5GHz
Frequency Band	2.4GHz, 5GHz
Resolution Support	4K UHD
Network Connectivity	Ethernet, WiFi
Maximum Output Resolution	3840 x 2160
Audio Output	HDMI
Security	WPA2
Management	Centralized Management System (CMS)
Maximum Data Rate	300 Mbps
Ethernet	1 x Gigabit Ethernet

Summary

Part I Getting Started

I.3 Minimum Requirements

Outlines system and network prerequisites for using the receiver.

I.3.1 System Requirements

Specifies client device operating systems and versions compatible with the receiver.

I.3.2 Network Requirements

Details network hardware and protocol requirements for optimal connectivity.

I.3.3 Setup Requirements

Lists essential hardware and connections needed for initial receiver setup.

Part II Installing the Receiver

II.1 Setting up ScreenBeam 1100 Plus Receiver

Provides step-by-step instructions for physically connecting the receiver to a display.

II.2 Connecting the Receiver to a Network

Explains how to establish wired and wireless network connections for the receiver.

II.2.1 Wired Connection

Details the process of connecting the receiver using an Ethernet cable.

II.2.2 Wireless Connection

Guides users through configuring the receiver for wireless network connectivity.

II.2.3 Dual-network Connection

Part III Connecting Client Device

III.2 Connect using Local Wi-Fi

Step-by-step guide to connect a client device using the receiver's local Wi-Fi access point.

III.3 Connect using Wi-Fi Miracast

Instructions for establishing a connection using the Miracast protocol.

III.4 Connect using Existing Wireless Network or LAN

Guide on connecting client devices through the existing network infrastructure.

III.5 Displaying with a connected HDMI cable

Part IV Display and Control Options

IV.1 Projection Mode

IV.3 USB over Network Control

IV.4 Using Interactive Touch Display

IV.4.4 Setup and Instructions

Step-by-step guide to enable and use the interactive touch feature.

Part V Device Management for IT Administrator

V.1 Using ScreenBeam CMS Software

V.2 Using Local Management on ScreenBeam

Explains accessing the receiver's interface for single-unit configuration.

V.2.1 Method 1: ScreenBeam Local Wi-Fi Network

Details accessing the LMI via the receiver's direct Wi-Fi connection.

V.2.2 Method 2: Network Connection via DHCP

Describes accessing the LMI through a network connection via DHCP.

V.2.3 Method 3: Wireless P2P Direct Connection

V.3 Configuring ScreenBeam

Covers various settings for customizing receiver behavior and features.

V.3.1 General Settings

V.3.1.1 Renaming the Receiver

V.3.1.2 Setting up the Login Username and Password

V.3.1.4 Modifying the Receiver’s Host Name

V.3.2 Setting up Wireless Display Mode

V.3.3 Wireless Display over LAN

V.3.3.1 Setting up Wireless Display over LAN for Windows 10 Devices

V.3.3.2 Setting up Native Screen Mirroring for macOS/iOS Devices

V.3.3.3 Setting up Wireless Display over LAN for Chrome OS Device and Device with Chrome Browser

V.3.4 P2P Wireless Settings

V.3.4.1 Setting up Miracast Connection

V.3.4.2 Setting up P2P Operating Channel

V.3.5 Security Settings

V.3.5.1 Setting up PIN Pairing Method

How to configure PIN entry for secure device pairing.

V.3.6 Display Settings

V.3.6.1 Setting up Display Sharing Mode

Choosing between Single, Quick Switch, and Multi-View display modes.

V.3.6.2 Setting up Receiver Name Display for Quick Switch

V.3.6.4 Managing HDMI/VGA Port Output

V.3.6.6 Adjusting TV Screen Size

V.3.6.7 Updating the Receiver’s Background Image

V.3.6.8 Updating the Receiver’s Screen Saver Image

V.3.8 Network Settings

Options for configuring network interfaces and connectivity.

V.3.8.1 Setting up Local Wi-Fi Network Mode

V.3.8.2 Setting up an Interface for CMS Connection

V.3.8.5 Setting up the Receiver’s IP Address

Configuring static or automatic IP assignment for network interfaces.

V.3.8.6 Specifying a DNS Server for the Receiver

V.3.9 Local Wi-Fi Settings

V.3.10 Receiver Management Access Settings

Controls how the receiver can be managed remotely or locally.

V.3.10.1 Specifying ScreenBeam CMS for the Receiver

V.3.10.2 Specifying a Port for the Receiver’s LMI

V.3.10.3 Setting up Local Management Interface Access

Part VI Updating Firmware for the Receiver

VI.1 Firmware Update via LMI

Methods for updating firmware using the Local Management Interface.

VI.1.1 Updating Firmware from a Local PC

Step-by-step guide to update firmware from a connected computer.

VI.1.2 Updating Firmware from the Internet

Process for updating firmware directly from the internet.

VI.2 Firmware Update using a USB Flash Drive

Instructions for updating firmware using a USB drive.

Part VII Receiver Maintenance

VII.1 Setting up Receiver Logging

VII.2 Exporting Receiver Log with LMI

VII.5 Rebooting the Receiver

VII.6 Resetting the Receiver to Default

Steps to restore the receiver to its original factory settings.