ScreenBeam 1100 Plus - I.3.3 Setup Requirements

3
 Multicast DNS (mDNS) support is required for auto-discovery of ScreenBeam
 Required ports
• 5353 (UDP) for Multicast DNS (mDNS) discovery
• 7100 (TCP) for macOS, iOS and Windows 10 mirroring
• 7250 (TCP) for Miracast over LAN data stream
• 47000 (TCP) for Airtunes in AirPlay
• 18000-18009 (TCP) for macOS and iOS AV data
Note: Additional network configuration is not required for Wi-Fi Miracast enabled device to
connect. Verify Group Policy and firewall settings allow Wi-Fi Direct groups or hosted
networks.
I.3.3 Setup Requirements
 ScreenBeam 1100 Plus receiver
 Display with an available HDMI input
 (Optional) Touchscreen with USB touch cable
 An Ethernet network connection with DHCP IP or a Wi-Fi router
Note: This is used for wireless display over LAN and management.