ScreenBeam 1100 Plus - V.3.6.4 Managing HDMI;VGA Port Output

63
V.3.6.4 Managing HDMI/VGA Port Output
To set up HDMI/VGA port output, follow this procedure:
1. Go to the Features tab page by clicking the Features tab.
2. Go to the Display Setting section, and select a desired option in the HDMI/VGA Port
Power management drop-down box. Available options are: Always On, Screensaver,
and Display Off.
 Always On: Selecting this option, the HDMI output is always on.
 Screensaver: Selecting this option, the system will run the screen saver after the
defined idle time expires. Users can define the idle time (1-9999 seconds) in the Wait
time box.
 Display Off: Selecting this option, the HDMI/VGA output will be turned off after the
defined idle time expires. Users can define the idle time (1-9999 seconds) in the wait
time box.