ScreenBeam 960 - Network Requirements

3
1.3.2 Network Requirements
For wireless display over the existing wireless network or LAN:
 Ethernet: 100BASE-T 10/100 connection (1 Gbps is recommended)
 Wireless: 802.11ac (5 GHz is strongly recommended)
 Multicast DNS (mDNS) support is required for auto-discovery of ScreenBeam
 Required ports
• 5353 (UDP) for Multicast DNS (mDNS) discovery
• 7100 (TCP) for macOS, iOS and Windows 10 mirroring
• 7250 (TCP) for Miracast over LAN data stream
• 47000 (TCP) for Airtunes in AirPlay
• 18000-18009 (TCP) for macOS and iOS AV data
Note: Additional network configuration is not required for Wi-Fi Miracast enabled device to
connect. Verify Group Policy and firewall settings allow Wi-Fi Direct groups or hosted
networks.
1.3.3 Setup Requirements
 ScreenBeam 960 receiver
 Display with an available HDMI input or VGA input
 (Optional) Touchscreen with USB touch cable
 An Ethernet network connection with DHCP IP or a Wi-Fi router
Note: This is used for wireless display over LAN and management.
1.3.4 Legacy Device Support
The receiver is also compatible with the following devices:
 Non-Miracast ready laptops and PCs (Windows 7) with ScreenBeam USB Transmitter 2
(SBT200DI) or ScreenBeam USB Transmitter (SBT100U)
 Windows 7 devices with ScreenBeam SBCast software
 Apple Mac OSX (Yosemite, El Capitan, Sierra, High Sierra) devices with ScreenBeam
SBCast app