ScreenBeam 960 - Screenbeam 960; System Requirements

2
1.2.1 ScreenBeam 960
 ETHERNET, for connecting to ScreenBeam Central Management System via Ethernet
for receiver management
 HDMI OUT, for connecting to HDTV/projector with an HDMI port for video and audio
output
 POWER, for power supply
 RESET, for resetting the receiver to default settings
 LED Indicator, indicating power supply status
 AUDIO OUT, for outputting audio to speaker (available for both HDMI out and VGA out)
 USB, for provisioning CMS connection data, firmware update, and USB over network
control (UIBC)
 VGA-OUT, for connecting to an HDTV/projector with a VGA port for video output
 VGA-IN, VGA input for VGA bypass
1.3 System Requirements
System requirements for the receiver are shown below:
1.3.1 System Requirements
Client device from 2015 or newer with one of the following operating systems:
 Windows 10 build 1709 (and later)
 macOS X 10.10 (and later)
 iOS 9 (and later)
 Android 4.4 (and later) with Miracast