quick start guide
To connect over local Wi-Fi
1.
Connect the client device’s Wi-Fi to the wireless network (AP
SSID) as shown on the TV display..
2.
Enter the password for the wireless network. “screenbeam” is
the default password.
3.
To display wirelessly, you need to find the receiver on the local
network connection (i.e. Select the ScreenBeam receiver name
as shown on the display)
z For Windows 10 hit the Windows key and K at the same time
z For iOS or macOS Connect with from the menu bar or
control center.
4.
Enter in the PIN if required. If the PIN code is not displayed, try
the default PIN 1234.
5.
Select duplicate or extended screen mode if prompted.
6.
If the display has touch functionality, Windows 10 devices can
take advantage of the touch and inking feature by selecting
check box for HID devices described above
8 | screenbeam.com
To Next Page
Loading...
