3. Remote live view is slow
- Lower the video settings. (see: Using the App #6
and Troubleshoot #5)
- Internet connection may be slow.
- Camera out of range. Place the camera closer to
the router.
- Reboot the camera or unplug power and re-plug
to reestablish Wi-Fi connection.
3.1. Even at low resolution, remote live
remote view is slow and keeps disconnecting.
- Reboot your router to refresh wireless
connectivity.
4. Password error
- If you have changed the PW and can’t remember,
you must reset the camera and setup it up again.
Press-hold the reset button (small round white
button) for about 15 sec while the camera is ON,
and wait until the LED double blink.
- If you have not changed the PW, try the default
PW: admin
To Next Page
Loading...