5. Poor resolution
- The camera default resolution is set to low (LD)
for a faster connection. Go to the live view and
change the resolution from (LD) to (HD). You can
further adjust the resolution at: Settings Explained.
.
6. Angle of the camera does not cover…
- All SCS WiFI cameras look through a hole for best
picture clarity. 90 deg is the maximum angle for a
pinhole lens. Place the camera near corner of a
room looking towards the center to cover the
whole room.
- Camera lens is permanently fixed and its angle
cannot be adjusted by a user. Please contact us if
you need any custom camera angle.
To Next Page
Loading...