Part A. Installation
“Please follow the set-up step by step.”
1. Connect power to the camera.
2. WAIT up to 30 sec until the faint LED light
double blinks every 2 sec.
If the LED remains solid or rapidly blinks, press
the reset button (small round white button) for
about 10 sec while ON, and wait.
3. Download and install the app: “iOTLiving”
(must permit all accesses such as album,
notification, etc.) Do not open the app yet.
(Android devices may not find the app, please
see Troubleshoot Guide 8.1.
To Next Page
Loading...