Manual Version 19 / 01-2019 II Page 21 of 44
SF2 ECCR OPERATION MANUAL
Chapter 5 – Assembling the SF2
The SF2 is delivered pre-assembled. All essential components are already
assembled and checked. However, accessories such as bottles, wings, and
regulators still have to be fitted and, in some cases, adapted to personal size
(harness). This happens as part of the SF2 diving course under the direct
supervision of the diving instructor. This gives practical tips and oversees the correct
assembly of all components. This is the only way to ensure proper functioning.
WARNING
The initial assembly of the SF2 must be under direct supervision
by an authorized SF2 instructor. Correct assembly guarantees
fault-free function of the device.
5.1 Attaching the cylinders
The male pony clamps are attached to the bottles with the help of hose clips. Both
the position and the height must be taken into account. (see pictures below)
To Next Page
Loading...