SDC 45 Series - User Manual

INSTALLATION INSTRUCTIONS
45 SERIES ELECTRIC STRIKES
P:\INSTALLATION INST\ELECTRIC STRIKES\INST-45\INST-45.vsd REV L 05-18 Page 1
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email engineer@sdcsecurity.com
801 Avenida Acaso, Camarillo, Ca. 93041 • (805) 494-0622 • Fax: (805) 494-8861
www.sdcsecurity.com • E-mail: service@sdcsecurity.com
45-4R – 4.875" Radius corners for
aluminum frame.
45-6R – 6.875" Radius corners for
aluminum/wood frame.
45-7R – 7.938" Radius corners for
aluminum/wood frame
MODELS:
45-4S – 4.875" (124mm) Square corners
for hollow metal frames.
FEATURES:
For 5/8” latch or 3/4” latch with 1/8” door gap.
Latch bolt monitor standard.
Keeper closed & deadlocked standard.
Field selectable failsafe / failsecure.
Field selectable voltage, 12/24V AC/DC
AC with Rectifier (BR64XL)
1/4” horizontal alignment adjustment.
Plug-in wire connectors.
Low profile, 1-3/16” deep
All stainless steel parts with durable die
cast body for corrosion resistance.
Fewer moving parts for maximum life.
630 stainless steel standard.
ANSI A156.31
UL Listed (BP10254)
U.S. Patent #7,540,542 B2

Summary

Product Models

45-4 S Square Corners

Electric strike for hollow metal frames with 4.875" square corners.

45-4 R Radius Corners

Electric strike for aluminum frames with 4.875" radius corners.

45-6 R Radius Corners

Electric strike for aluminum/wood frames with 6.875" radius corners.

45-7 R Radius Corners

Electric strike for aluminum/wood frames with 7.938" radius corners.

Key Features

Latch Bolt and Gap Compatibility

Suitable for 5/8" or 3/4" latch with 1/8" door gap.

Standard Inclusions

Latch bolt monitor and keeper closed/deadlocked are standard.

Voltage and Alignment

Field selectable voltage (12/24V AC/DC) and horizontal alignment adjustment.

Durability and Compliance

Stainless steel parts, low profile, UL listed, and ANSI A156.31 compliant.

Electrical Data and Monitoring

Dual Voltage Operation

Details dual voltage operation at 12/24VDC and 12/24VAC, with current ratings.

Wiring Specifications

Describes wiring for Latch Status, Keeper-Open/Closed, and Keeper/Deadlocked.

Monitoring Capabilities

Specifies Latch Status and Keeper Open/Closed monitoring capabilities.

Installation Adjustments

Horizontal Alignment Procedure

Instructions for adjusting the die cast body horizontally for alignment.

Frame Preparation Details

Hollow Metal Frame Preparation

Diagram and specifications for preparing hollow metal frames for the strike.

Aluminum Frame Preparation

Diagram and specifications for preparing aluminum frames for the strike.

Aluminum;Wood Frame Preparation

Diagram and specifications for preparing aluminum/wood frames for the strike.

SDC 45 Series Specifications

General

Operating Voltage	12/24VDC
Endurance	1 million cycles
Fire Rating	3 hours
Strike Plate Size	4-7/8"
Handing	Universal
ANSI Grade	1
Keyway	Not Applicable
Door Thickness	1-3/4”