Operation & Maintenance Manual──LG918 Wheel Loader
33
△
! NOTICE
z Do not allow lubricant or grease to leak.
z Do not randomly put the tools around the work place.
z Walk slowly and carefully.
z Never jump down from the machine. When climbing up and down the machine, face the machine
and keep three points contact (two hands-one foot or two feet-one hand) with the handrails and
pedals to ensure safety.
z Use protective equipment if necessary.
z Never stand on the top of the engine hood because it is slippery and dangerous.
z Never stand on the top of tires because they are slippery and dangerous.
z Stand on the mudguard of the front frame and seize the handrail to clean the front glass of the
operator cab.
8.6 Maintenance While the Engine is Working
Routine maintenance of the machine should never be done while the engine is working. When it is
necessary, please follow the rules below:
z Assign an operator to sit on the seat to ensure all the
maintenance people can have contact with him so he
can prepare to shut the engine when requested.
z Never touch a high temperature part such as tail pipe
and silencer to prevent injury.
z Be careful if the repair space is near the rotation part.
z Do not touch any lever (or handle). If necessary to
touch it, warn the others to go to a safe place.
z Never let any tool or body part touch the fan leaf or fan belt. Otherwise serious hurt may occur.
z Do not make adjustments unless fully trained to do so.
8.7 Do not let anything fall into the inner part of the machine
To Next Page
Loading...
Need help?
General
