Contents
1. Preface
2. Description
3. Preparation before use
4. Using the generator set
5. Safety features
6. Maintenance schedule
7. Maintenance procedures
8. Storing the generating set
9. Troubleshooting
10. Specifications
11. Cable sizes
12. EC Declaration of conformity
1. Preface
1.1. Recommendations
Warning
Read this manual carefully before use.
The safety advice and the usage and maintenance instructions for the generating set must always
be strictly adhered to.
The information contained in this manual is taken from technical data available at the time of print. In line with our policy of continually
improving the quality of our products, this information may be amended without warning.
1.2. Pictograms and plates on the generating sets and what they mean
Danger
Danger:
risk of electric shock
Earth
Danger: risk of burns
Danger: the generating set is
supplied without oil.
Before starting the generating
set always check the oil level.
1 2 3
1 - Warning: refer to the documentation accompanying the generating set.
2 - Warning: emission of toxic exhaust gases. Do not use in a confined or poorly
ventilated area.
3 - Stop the motor before filling with fuel.
A = Generating set model
B = Generating set output
C = Voltage
D = Amperage
E = Current frequency
F = Power factor
Example of an identification plate
G = Protection rating
H = Generating set noise output
I = Generating set weight
J = Reference Standard
K = Serial number
1.3. Instructions and safety regulations
Danger
Do not run the generating set without having put back the protective covers and closed the access doors.
Never take the protective covers off or open the access doors if the generating set is running.
To Next Page
Loading...
Need help?
General
