40
BREAK-IN PERIOD
CAUTION: Scrupulously follow the
instructions of this section. Failure
to do so may reduce the engine’s life
and/or performance.
With SEA-DOO watercraft powered by
Rotax
®
engines, a break-in period of 10
hours is required before continuous
operation at full throttle.
With the DI engine, in order to achieve
a good break-in, vary the engine speed
every few minutes with brief wide
open throttle accelerations of up to 15
seconds.
CAUTION: Continued wide open
throttle runs and prolonged cruising
without speed variations should be
avoided, this can cause engine dam-
age during the break-in period.
CAUTION: Remove and clean spark
plugs after engine break-in.
NOTE: Adding injection oil in the fuel
tank for the break-in has no noticeable
effects on a DI engine.
10-Hour Inspection
It is highly recommended that after the
first 10 hours of operation, the water-
craft be checked by an authorized
SEA-DOO dealer. This inspection will
also provide the opportunity to discuss
the unanswered questions you may
have encountered during the first hours
of operation.
The 10-hour inspection is at the ex-
pense of the watercraft owner.
smo2003-005a.book Page 40 Friday, November 1, 2002 8:25 AM
To Next Page
Loading...
Need help?
General