52
Properly reconnect spark plug cables
to spark plugs.
Wipe up any residual water from the en-
gine.
Anticorrosion Treatment
To prevent corrosion, spray a corrosion
inhibitor (salt water resistant) such as
BOMBARDIER LUBE lubricant or equiv-
alent over metallic components in en-
gine compartment.
Apply dielectric grease (salt water re-
sistant) on battery posts and cable con-
nectors.
CAUTION: Never leave rags or tools
in the engine compartment or in the
bilge.
WARNING
Always reconnect spark plug ca-
bles at the same spark plugs where
they come from. The cable coming
out the edge of the electrical box
must be connected to the MAG side
spark plug.
smo2003-005a.book Page 52 Friday, November 1, 2002 8:25 AM
To Next Page
Loading...
Need help?
General