Sea-doo RX DI 2002 User Manual

www.SeaDooManuals.net

Sea-doo RX DI 2002 Specifications

General

Manufacturer	Sea-Doo
Model	RX DI
Year	2002
Category	Personal Watercraft
Engine Type	2-Stroke
Engine	Rotax 947
Displacement	947 cc
Horsepower	130 hp
Seating Capacity	2
Fuel Capacity	15.9 US gallons
Fuel System	Direct Injection

Summary

Safety Measures and Guidelines

General Safety Rules

Basic rules for safe operation and enjoyment of the watercraft.

Safe Operation Guidelines

Guidelines for safe operation, including PFD use, clothing, and maneuvers.

Watercraft Maintenance Procedures

General Watercraft Maintenance

Procedures for keeping the watercraft in top condition and following schedules.

Bombardier Limited Warranty - North America

Warranty Scope and Coverage

Defines warranty coverage, period, and conditions for North American models.

Obtaining and Transferring Warranty

Process for claiming warranty service and transferring ownership coverage.

Warranty Exclusions and Limitations

Lists items not covered by warranty and liability limitations.

Consumer Assistance and California Specifics

How to get help and specific emission warranty for California models.

Bombardier Limited Warranty - International

International Warranty Scope and Conditions

Defines international warranty coverage, period, and requirements.

International Warranty Claims and Exclusions

Process for international warranty claims, exclusions, and limitations.

Registration and Identification Numbers

Registration Number Location

Provides instructions and illustration for finding the watercraft's registration number.

Hull and Engine Identification Numbers

Explains how to find Hull and Engine Identification Numbers.

Controls, Components, and Instruments Location

GS Models Controls Location

Illustrates the location of controls and components on GS models.

XP Models Controls Location

Illustrates the location of controls and components on XP models.

GTI/GTI LE Models Controls Location

Illustrates the location of controls and components on GTI/GTI LE models.

RX Series Controls Location

Illustrates the location of controls and components on RX Series models.

GTX Series Controls Location

Illustrates the location of controls and components on GTX Series models.

Controls and Instruments Functions

Safety Lanyard and DESS System

Explains the function and use of the safety lanyard and DESS system.

Handlebar and Steering Functions

Details handlebar controls for steering and related functions.

Throttle and Shifter Operations

Explains throttle lever acceleration and shifter lever for gear selection.

Start/Stop Button and VTS System

Describes the engine start/stop button and Variable Trim System functions.

Gauges and Information Center

Explains the function of gauges, fuel level, and the multifunction information center.

Storage and Fuel System Controls

Details access to storage, fuel tank valve, cap, and oil reservoir.

Various Component Access Points

Explains access to tool kit, air intake, seat latches, and covers.

Exterior Component Functions

Describes eyelets, cleats, boarding aids, and bleed outlets.

Jet Pump and Bilge System Components

Explains the jet pump nozzle, reverse gate, water intake, and bilge systems.

Electrical Components and Side Vanes

Covers fuse identification, battery location, and side vane function.

Fuel and Lubrication

Fueling Procedures and Recommended Fuel

Step-by-step instructions for safely fueling and recommended fuel types.

Recommended Oil and Injection System

Lists correct oil types and explains the oil injection system.

Break-In Period and Initial Inspection

Break-in Procedures for All Models

Details the required break-in period and specific procedures for different models.

10-Hour Inspection Recommendation

Recommends a 10-hour inspection by a dealer for initial checks.

Pre-Operation Checks

Pre-Operation Checklist

Provides a checklist of items to inspect before operating the watercraft.

Operating Instructions

Principle of Operation and Propulsion

Explains how the watercraft's propulsion system works.

Riding, Handling, and Stopping

Guidance on riding, stopping, and handling different water conditions.

Boarding Procedures

Instructions for safely boarding the watercraft from docks or in water.

Starting the Engine

Step-by-step guide for starting the engine, including cold/warm procedures.

Shutting Off the Engine

Instructions for safely shutting down the engine.

Post-Operation Care

General and Salt Water Care

Daily procedures for cleaning and protecting the watercraft, plus special care for salt water.

Cooling System Flushing and Lubrication

Procedures for flushing the cooling system and lubricating engine parts.

Anticorrosion Treatment

Steps for applying anticorrosion protection to metallic parts.

Special Procedures

Monitoring System and Limp Home Mode

Explains the monitoring system, coded signals, and limp home mode functions.

Engine Overheating and Jet Pump Cleaning

Procedures for engine overheating and cleaning the jet pump intake.

Water-Flooded and Fuel-Flooded Engines

Steps to take if the engine becomes water-flooded or fuel-flooded.

Towing and Battery Condition

Precautions for towing and advice on low-charge battery conditions.

Maintenance

Engine Emissions Information and Responsibility

Details on manufacturer, dealer, and owner responsibilities regarding emissions.

Lubrication and Anticorrosion Procedures

Explains lubrication steps for PTO flywheel and protection for cables/connections.

Periodic Inspection Schedule

Importance of routine maintenance and inspection schedules.

Cable, Carburetor, and Filter Maintenance

Instructions for inspecting cables, adjusting carburetors, and replacing filters.

Steering Alignment and VTS Adjustment

How to check steering alignment and adjust the Variable Trim System.

Fuses and Electrical Box Access

Information on locating, checking, and replacing fuses in MPEM and rear box.

General Inspection and Cleaning

Procedures for inspecting the engine compartment and cleaning the watercraft.

Trailering, Storage, and Pre-Season Preparation

Trailering and Launching/Loading Safety

Guidelines for safely trailering, launching, and loading the watercraft.

Storage and Engine Draining Procedures

Recommendations for storing the watercraft, including engine draining.

Hose Pinchers and Disconnection

Instructions for installing and disconnecting hoses for maintenance.

Antifreeze Procedures and Protection

Detailed steps for cooling system antifreeze and anticorrosion treatment.

Final Storage Steps and Pre-Season Prep

Final actions before storage and tasks for pre-season preparation.

Troubleshooting

Monitoring Beeper Codes and Engine Start Issues

Explains beeper codes and remedies for engines that won't start.

Engine Running Irregularities

Troubleshooting for misfires, overheating, pinging, and lack of power.

Performance and Speed Issues

Solutions for issues with acceleration, idle speed, top speed, and O.P.A.S. system.

Propulsion System Noise

Troubleshooting for abnormal noises from the propulsion system.

Specifications

GS Model Specifications

Technical specifications for the GS model watercraft.

XP Model Specifications

Technical specifications for the XP model watercraft.

GTI/GTI LE and GTX Model Specs

Technical specifications for GTI/GTI LE and GTX models.

GTX RFI Model Specifications

Technical specifications for the GTX RFI model watercraft.

RX and RX DI Model Specifications

Technical specifications for RX and RX DI models.

SI Metric Information

Metric Unit Conversions

Provides conversion factors between SI and imperial units.

Abbreviations Used in This Manual

Glossary of Abbreviations

Lists and defines abbreviations used throughout the manual.