8
Maintenance
Only perform servicing procedures
which are detailed in this guide. Fur-
ther assistance or information can
be obtained from your authorized
Sea-Doo dealer. In many instances
proper tools and training is required
for certain servicing or repair proce-
dures.
Maintain the watercraft and equip-
ment in top condition at all times. Ad-
here to the prescribed maintenance
schedules. An annual inspection of
the watercraft is always a good rec-
ommendation that should be fol-
lowed.
Always use spark plug cable ground-
ing device when removing spark
plugs.
The bilge should be kept clean of oil,
water or other foreign materials.
Do not attempt to lift the watercraft
without special equipment and train-
ing.
The engine and the corresponding
components identified in this guide
should not be utilized on product(s)
other than for those they were de-
signed. Maintenance procedures and
specified tightening torque should be
strictly adhered to. Never attempt re-
pairs unless the appropriate tools are
available. These watercrafts are de-
signed with parts dimensioned in
both the metric and the imperial
systems. When replacing fasten-
ers, make sure to use only those
recommended by Bombardier. If re-
quired, contact your authorized Sea-
Doo dealer for further servicing infor-
mation.
smo2002-002a.book Page 8 Monday, July 30, 2001 2:18 PM
To Next Page
Loading...
Need help?
General