77
All Models
Apply anti-seize lubricant on spark plug
threads then reinstall them.
Properly reconnect spark plug cables
to spark plugs.
Wipe up any residual water from the
engine.
717 and 787 Engines
Reinstall plug on air intake silencer cover.
Anticorrosion Treatment
To prevent corrosion, spray a corrosion
inhibitor (salt water resistant) such as
BOMBARDIER LUBE lubricant or equiv-
alent over metallic components in en-
gine compartment.
Apply dielectric grease (salt water re-
sistant) on battery posts and cable con-
nectors.
CAUTION: Never leave rags or tools
in the engine compartment or in the
bilge.
WARNING
On DI models always reconnect
spark plug cables at the same spark
plugs where they come from. The
cable coming out the edge of the
electrical box must be connected to
the MAG side spark plug.
smo2002-002a.book Page 77 Monday, July 30, 2001 2:18 PM
To Next Page
Loading...
Need help?
General