DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 - Page 10 of 64
Section 1: Introduction
1.1 Unpacking System
Prior to removing the LBV and all components, locate a suitable area for operation.
Find an area that is comfortable, protected from harsh conditions and clear of potential
hazards.
Requirements for operation:
Suitable power source
Dry area
Contents of packaging:
LBV underwater vehicle
Integrated Control Console
Tether and/or Tether & reel
Spares/Tool Kit
Manual/CD ROM
Accessories (if applicable)
Note: When unpacking the LBV after receipt, inspect the LBV for damage. It
is strongly recommended that vacuum be verified before each use (see section
1.4.1.4, page 14).
LBV150
2
URS250
ICC
To Next Page
Loading...