DOCS-001 Manual, SeaBotix Inc. Users, 150 – 200 Series - Rev B – 27 Jan 10 - Page 27 of 64
2.3 MENUS
The LBV has a variety of menus to allow the user to configure the LBV, calibrate the
system and run diagnostics. To enter the main menu, press the PRGM key on the
membrane keypad on the operator control unit.
2.3.1 Quick Menu
1. Acc. Not Found
a. Pressing the 1 key will enable the Accessory + and – keys to operate
an optional accessory. When fitted, the accessory title will appear in
placement of Acc. Not Found.
2. Acc. Not Found
a. Pressing the 2 key will enable the Accessory + and – keys to operate
an optional accessory. Same as 1.
3. Acc. Not Found
a. Pressing the 3 key will enable the Accessory + and – keys to operate
an optional accessory. Same as 1. and 2.
4. Acc. Not Found
a. Pressing the 4 key will enable the Accessory + and – keys to operate
an optional accessory. Same as 1. and 2.
5. Acc. Not found
a. Pressing the 5 key will take you to the Main Menu.
2.3.2 Main Menu
The main menu is the starting point for customizing the LBV to each user, calibrate the
sensors, view diagnostics and adjust any options fitted.
1. Setup
a. Pressing the 1 key will take you to the Setup Main Menu.
2. Calibrate
a. Pressing the 2 key will take you to the Calibrate Main Menu.
3. Diagnostics
a. Pressing the 3 key will take you to the Diagnostics Main Menu.
4. Options
a. Pressing the 4 key will take you to the Options Main Menu.
To Next Page
Loading...