SeaDoo GTX 4-Tec Series User Manual

24
IDENTIFICATION NUMBERS
The main components of the water-
craft (engine and hull) are identified by
different serial numbers. It may some-
times become necessary to locate
these numbers for warranty purposes
or to trace the watercraft in the event
of theft.
Hull
The Hull Identification Number (H.I.N.)
is located on footboard at the rear of
watercraft.
1. Hull Identification Number
It is composed of 12 digits:
Engine
NOTE: Refer to SPECIFICATIONS sec-
tion to find what engine is used on each
model.
The Engine Identification Number (E.I.N.)
is located on the front end of the engine.
1. Engine Identification Number (E.I.N.)
1
F18L0ZY
Z Z N 1 2 3 4 5 L 4 9 5
Model year
Serial
number*
F00A0CZ
Month of production
Year of production
* A letter may also be used as a digit.
Manufacturer
F18D03Y
1
smo2002-003_a.book Page 24 Friday, October 12, 2001 2:04 PM

SeaDoo GTX 4-Tec Series Specifications

General

Seating Capacity	3
Rider Capacity	3
Manufacturer	BRP (Bombardier Recreational Products)
Category	Personal Watercraft (PWC)
Engine Type	4-stroke
Fuel Type	Unleaded gasoline
Width	48 in (122 cm)