SeaDoo GTX 4-Tec Series User Manual

64
Snugly install the hose pincher on the
water supply hose as shown.
1. Hose pincher
CAUTION: When finished towing the
watercraft, hose pincher should be
removed before operating it. Failure
to do so will result in damage to the
engine.
After removal of hose pincher, proper-
ly reinstall and lock vent tube. When
pushing tube in place, you should hear
a click that validates it is locked.
Low-Charge Battery
Condition
See an authorized Sea-Doo dealer to
have it charged or replaced.

WARNING
Do not charge or boost the battery
while installed on the watercraft.
Electrolyte is poisonous and dan-
gerous. Avoid contact with eyes,
skin and clothing.
1
F18E0RY
smo2002-003_a.book Page 64 Friday, October 12, 2001 2:04 PM

SeaDoo GTX 4-Tec Series Specifications

General

Seating Capacity	3
Rider Capacity	3
Manufacturer	BRP (Bombardier Recreational Products)
Category	Personal Watercraft (PWC)
Engine Type	4-stroke
Fuel Type	Unleaded gasoline
Width	48 in (122 cm)