SeaDoo GTX 4-Tec Series User Manual

51
1. Shift lever in neutral position
1. Reverse gate in middle position
To obtain reverse, pull shift lever com-
pletely. The reverse gate will be in down-
ward position, directing all the thrust to-
ward the front of the watercraft.
1. Shift lever in reverse position
1. Reverse gate in downward position
NOTE: To obtain maximum efficiency
and control from the reverse, increase
engine speed to slightly above idle.
Too much RPM will create water tur-
bulence and reduce reverse efficiency.
In reverse position, turn the handlebar
in the same direction that you want to
move the rear of the watercraft.
For example, to steer the rear of the wa-
tercraft to the left side, turn the handle-
bar to the left side.
F18J02Y
1
F18J0AY
1
F18J03Y
1
1
F18J07Y
F18J08Y
smo2002-003_a.book Page 51 Friday, October 12, 2001 2:04 PM

SeaDoo GTX 4-Tec Series Specifications

General

Seating Capacity	3
Rider Capacity	3
Manufacturer	BRP (Bombardier Recreational Products)
Category	Personal Watercraft (PWC)
Engine Type	4-stroke
Fuel Type	Unleaded gasoline
Width	48 in (122 cm)