Seagate Nytro 2.5” x 7mm SSD Product Manual, Rev. A 4
Scope
www.seagate.com
1.0 Scope
Seagate Nytro 5000 is a PCIe Gen 3 SSD, designed with the NVMe (Non-Volatile Memory Express) interface that delivers
leading performance, low latency, and world class reliability and endurance.
· Interface:
PCIe Gen 3 x4 NVMe SSD
Out of Band Management (SMBus)
management support
See Section 1.6 for details.
· Capacities:
800GB, 960GB, 1.6TB, 1.92TB.
See Section 1.2 for details.
· Components:
3D cMLC NAND Flash Memory
· Form Factor:
SFF 2.5 inch X 7mm
· Power
Lower power than current Enterprise class
products (12.5W)
Power Loss Data Protection (PLDP)
Hot Plug capable
Idle Power: 2.5 2.8W
Average Read/Write Power: 6.7W(without
Supercapacitor Learn cycle) 9.0W
See Section 1.4 and Section 1.5 for details.
·Shock
Operating/Non-Operating: 1500G @ 0.5ms
(Gs)
· Vibration
Operating: 3.08 G
RMS
(7-800Hz), 16.3 G
RMS
(20-2000Hz)
· Certification
CE, BSMI, KCC, C-Tick,
FCC, IC, UL, TUV, CB
·Product Compliance
RoHS
·Reliability:
Mean Time Between Failure (MTBF):
2 million hours
Data Retention: 3 months @ 40°C
Sector Sizes: 4096 and 512 bytes
Non-recoverable Read Errors per bits read:
1 per 10E16
See Section 1.8 for details.
·Endurance
High Endurance models support up to 1.5
Drive Writes/day
Light Endurance models support up to 0.3
Drive Writes/day
See Section 1.9 for details.
· Temperature
Operating: 0 to 70°C
(as measured by SMART)
Non Operating: -40 to 85°C
See Section 1.7 for details.
·Airflow
See Section 1.7 for details.
·Performance
Varies by capacity and endurance. See
Section 1.3 for details.
·Security
Self encryptions available
·Warranty
5 years limited
To Next Page
Loading...
