Battery
LED
Color
Description
GreenCharged—A fully charged battery provides up to 10 hours of continuous streaming, but loses the
charge faster when playing higher resolution video. The battery retains its charge for up to 25 hours
.when the device is in standby mode, which occurs after 5 minutes of inactivity
RedLow—The battery needs to be charged. When the LED turns red, the battery has about 15–20
.minutes of life and should be charged soon
AmberCharging—The device is plugged in and charging. Recharging takes about 4 hours. For safety
.purposes, the device stops charging after 4 hours
.Your Seagate Wireless Plus also charges when it is physically connected to a computer but at a slower rate
Recycling the Baery
The battery is not user-replaceable and is affected by the number of charge cycles. It must be disposed of
.properly
Reseng Your Device to Its Factory Sengs
.For a variety of reasons, you might need to reset your Seagate Wireless Plus back to its original factory settings
Press and release the button located on the bottom of your device. No data is lost during this process, and
.you do not need to reconfigure the device
To Next Page
Loading...
