EasyManua.ls Logo

Seagull Models Focke-Wulf Fw 190 - User Manual

Seagull Models Focke-Wulf Fw 190
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Specications:
Wingspan---------------80 in (203.3 cm)
Wing area---------------1083.8 sq.in (69.9 sq.dm)
Weight-------------------19.8 lbs (9.0 kg)
Length-------------------62.9 in (159.7 cm)
Engine-------------------50cc
Motor size---------------Power 360
Radio--------------------8 channels with 8 servos
Electric Power Conversion Optional
ASSEMBLY MANUAL
Code : SEA 257M
Question and Answer IconNeed help?

Do you have a question about the Seagull Models Focke-Wulf Fw 190 and is the answer not in the manual?

Summary

Introduction and Preparation

Introduction and Safety

Overview of the model, including safety precautions and disclaimers.

Kit Contents and Tools

Lists all model parts, required additional items, and necessary tools.

Control Surface Hinging

Detailed instructions on how to hinge control surfaces like the flap.

Control Surface Installation

Ailerons Control Horn Setup

Guidance on installing the control horns for the ailerons.

Flap Control Horn Setup

Instructions for installing the control horns specifically for the flaps.

Elevator Control Horn Setup

Procedure for installing the control horns for the elevator.

Rudder Control Horn Setup

Guidance on installing the control horns for the rudder.

Servo and Pushrod Installation

Aileron Servo Installation

Step-by-step guide for installing the servos for the ailerons.

Flap Servo and Pushrod Installation

Procedures for installing the flap servos and their associated pushrods.

Aileron Pushrod Installation

Steps for installing the pushrods for the ailerons.

Elevator Pushrod Installation

Steps for installing the elevator pushrods.

Rudder Pushrod Installation

Procedure for installing the rudder pushrods.

Major Component Installation

Landing Gear Installation

Detailed instructions for installing the retractable landing gear system.

External Components Attachment

Instructions for attaching accessories like the bomb and wing guns.

Wing Assembly Procedure

Steps involved in assembling the main wings of the aircraft.

Fuselage Systems Installation

Guide for installing servos, throttle arm, and receiver switch within the fuselage.

Engine and Fuel System Setup

Procedures for installing the engine switch and fuel tank.

Engine Mounting Procedure

Detailed steps for securely mounting the engine to the firewall.

Cowling Installation

Steps for fitting and securing the engine cowling.

Electric Power Conversion Guide

Instructions for converting the model to electric power.

Electric Motor Mounting

Steps for mounting the electric motor box and the motor itself.

Tail Assembly and Final Setup

Spinner and Elevator Hinges

Instructions for installing the spinner, propeller, and elevator hinges.

Rudder and Fin Hinge Installation

Steps for installing hinges for the rudder and fin.

Horizontal Stabilizer Installation

Instructions for attaching the horizontal stabilizer to the fuselage.

Tail Wheel Mounting

Instructions for mounting the tail wheel assembly.

Pilot and Canopy Installation

Steps for installing the pilot figure and the canopy.

Applying Decals

Guide on how to properly apply decals to the model.

Flight Preparations

Battery and Receiver Installation

Procedure for installing the battery and receiver.

Wing-Fuselage Attachment

Steps for attaching the main wing to the fuselage.

Balancing Procedure

Critical instructions for correctly balancing the aircraft.

Control Throws Setup

Setting up the control surface throws for optimal flight performance.

Flight Preparation and Preflight Checks

Steps to prepare the model for flight, checking controls and performing final checks.

Seagull Models Focke-Wulf Fw 190 Specifications

General IconGeneral
BrandSeagull Models
ModelFocke-Wulf Fw 190
CategoryToy
LanguageEnglish

Related product manuals