Seagull Models SEA385 - ADDITIONAL ITEMS REQUIRED; TOOLS & SUPPLIES NEEDED; LED LIGHT SET

3
KIT CONTENTS
SEA385 Giant Scale Cessna O-1 Bird
Dog 122” ARF 70-125cc
1. Fuselage
2. Wing set (2)
3. Tail set (3)
4. Canopy
5. Cowling
6. Wing tube
7. Landing gear
8. Tail wheel
9. Fuel tank
10. Led light set
11. Windows
14. Rockets (2)
ADDITIONAL ITEMS REQUIRED
TOOLS & SUPPLIES NEEDED
in cyanoacrylate glue.
Medium cyanoacrylate glue.
30 minute epoxy.
5 minute epoxy.
Hand or electric drill.
Assorted drill bits.
Modelling knife.
Straight edge ruler.
2mm ball driver.
Phillips head screwdriver.
220 grit sandpaper.
90° square or builder’s triangle.
Wire cutters.
Masking tape & T-pins.
read-lock.
Paper towels.
� 70-125cc gasoline engine.
� Computer radio 8 channel with 8
servos.
� Glow plug to suit engine.
� Propeller to suit engine.
� Protective foam rubber for radio
system.
LED LIGHT SET
Please see pictures below.
1.
2.
One the green light for right wing tip,
two white light and the red light for le
wing tip. ey are designed to operate on
voltages 12 volts. Connect four lights into
switch circuit so that optional the dier-
ent ashes mode.
3.