Seagull Models ZLIN 50 - Final Pushrod and Servo Arm Setup

ZLIN 50. Instruction Manual
26
1.
2.
2.
1.
Elevator.
Rudder.
Throttle.
MOUNTING THE TAIL WHEEL.
Locate items necessary to install tail gear.
M3 x 12mm.
1.
2.
8mm.
M2 lock nut .
M2 clevis.
 10) Elevator and rudder pushrods assembly follow pictures below.
 11) Install servos arm to servos. Notice
the position of the servo arms on the servos.
See picture below.