Seagull Models CAP 232 User Manual

Made in Vietnam.
Kit features.
• Ready-made—minimal assembly & finishing required.
• Ready-covered covering.
• Photo-illustrated step-by-step Assembly Manual.
Specifications
Wing span-------------------------------------57.1in -------------------------------- 145cm.
Wing area------------------------------------604.5 sq.in ---------------------- 39 sq.dm.
Approximate flying weight-----------------7.5 lbs-------------------------------- 3.4kg.
Length-----------------------------------------51.7in-------------------------------131.4cm.
Recommended engine size------------ .46 - .55 cu.in-------------------- 2-stroke.
.72 - .82 cu.in -------------------- 4-stroke.
ELECTRIC CONVERSION : OPTIONAL.
Radio System required 4 channels with 6 digital servos.
Flying skill level Intermediate/advanced.
“Graphics and specifications may change without notice”.
ASSEMBLY MANUAL
MS: SEA 97
CAP 232

Seagull Models CAP 232 Specifications

General

Brand	Seagull Models
Model	CAP 232
Category	Toy
Language	English

Summary

CAP 232 Specifications

Kit Features

Highlights of the CAP 232 kit, including pre-made and pre-covered parts.

Introduction, Warnings, and Parts

Hinging the Ailerons

Control Horn and Hinge Installation

Elevator and Rudder Control Horns

Engine Mount and Fuel Tank Assembly

Fuel Tank, Battery, and Wheel Installation

Landing Gear and Engine Mounting

Cowling Installation

Optional Electric Conversion Setup

Electric Motor and Battery Installation

Component Installations: Spinner, Switch, Servos

Aileron Servo and Pushrod Installation

Wing and Horizontal Stabilizer Assembly

Vertical Stabilizer Installation

Elevator and Rudder Pushrod Horns

Tail Wheel Mounting

Pilot and Receiver Installation

Final Assembly and Balancing

Control Throws and Flight Preparation

Preflight Checks and Flying Settings