Seagull Models CAP 232 - Component Installations: Spinner, Switch, Servos

CAP 232. Instruction Manual
12
Throttle servo arm.
Elevator servo .
Elevator servo .
Rudder servo .
INSTALLING THE SWITCH.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm .
INSTALLING THE FUSELAGE SERVO.
Switch.
Adjustable Servo
connector.
Servo arm.
Loctite secure.
1 PCS.
Throttle servo .
Elevator servo .
Elevator servo .
Rudder servo .
SPINNER INSTALLATION.
Needle valve.
Battery hatch.
4
M3 x 10mm.
Install the switch into the precut hole in the
side of fuselage.