Seagull Models DHC-1 Chipmunk - User Manual

1
Specications:
Wingspan--------------- 80.0 in (203.2 cm).
Wing area--------------- 937.8 sq.ins (60.5 sq.dm).
Weight------------------- 10.4 lbs (4.7 kg).
Length------------------- 57.2 in (145.2 cm).
Engine/Motor size----- 20cc gasoline.
Radio--------------------- 5 channels with 7 servos.
ASSEMBLY MANUAL
Code : SEA 304

Summary

Introduction and Safety

Safety Warning Model Aircraft

Warning about the aeroplane not being a toy and assuming all risks.

Kit Contents Overview

Detailed Kit Components List

Required Items and Assembly Tools

Flap Hinging Procedure

Aileron Hinging Procedure

Aileron Control Horn Installation

Aileron Servo Installation

Aileron Servo Mounting and Wiring

Servo Lead Management

Securing servo connections and routing leads.

Aileron Pushrod Installation

Flap Installation: Servo and Pushrod

Landing Gear Installation - Initial Steps

Landing Gear Installation - Assembly

Landing Gear Installation - Mounting

Landing Gear Installation - Wheel Attachment

Landing Gear Installation - Final Securing

Fuselage Servo and Switch Installation

Fuel Tank Stopper and Installation

Engine Mount Installation

Engine Mounting Procedure

Throttle Pushrod Connection and Adjustment

Cowling Positioning and Drilling

Electric Power Conversion Components

Cowling Final Attachment

Electric Motor Box and Motor Mounting

Speed Control and Battery Connection

Horizontal Stabilizer Preparation

Spinner Assembly and Installation

Horizontal Stabilizer Mounting with Epoxy

Elevator Hinging and Installation

Elevator Control Horn Installation

Vertical Stabilizer Alignment and Installation

Vertical Stabilizer Mounting

Tail Wheel Mounting Procedure

Rudder Control Horn Installation

Rudder Hinging Procedure

Elevator Pushrod Connection

Rudder Pushrod Connection

Pilot and Canopy Installation

Pilot Figure Placement and Securing

Canopy Attachment to Fuselage

Battery and Receiver Securement

Wing to Fuselage Attachment

Decal Application Guide

Aircraft Balancing Procedure

Control Throws Specification

Flight Preparation Checks

Preflight Checklist Essentials

Seagull Models DHC-1 Chipmunk Specifications

General

Material	Balsa and Plywood
Type	RC Airplane
Skill Level	Intermediate
Radio	6 channel
Construction	Built-Up Balsa and Plywood