Seagull Models DHC-1 Chipmunk - Elevator Pushrod Connection

27
1) Install the elevator control horn using
the same method as with the aileron con-
trol horns.
2) Position the elevator control horn on
the both side of elevator.
Elevator control horn.
Control horn.
Metal clevis.
Elevator pushrod.
Elevator control horn.
3) read one clevis and M2 lock nut on
to each elevator control rod. read the
horns on until they are ush with the
ends of the control rods.
4) Elevator and rudder pushrods assem-
bly as pictures below.
ELEVATOR PUSHROD HORN
INSTALLATION.
Epoxy.
Elevator pushrod.
M2 lock nut.