Seagull Models DHC-1 Chipmunk - Flap Installation: Servo and Pushrod; Landing Gear Installation - Initial Steps

DHC-1 CHIPMUNK
Instruction Manual.
8
40mm
80mm
M3 clevis.
M3 lock nut.
INSTALLING THE FLAP SERVO.
Repeat the procedure for the ap servo.
INSTALLING THE FLAP PUSHROD.
Repeat the procedure for the aileron
pushrod.
40mm
80mm
M3 clevis.
M3 lock nut.
INSTALLING LANDING GEAR.
1)Locate items necessary to install Sprin
Landing Gear.