Seakeeper 26 GYRO - Page 57

INSTALLATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 26 GYRO
90265
2
3 of 4
Section 5: INSTALLATION CHECKLIST AND SUPPLIES
5.1 Required Supplies needed for Gyro Installation (not supplied with gyro)
Item Description Qty
Installation
Manual
Reference
Section
Other
Reference
System
1
Adhesive and cleaning supplies for bonding to hull
1
Mechanical
2
Soundproofing Considerations
1
Mechanical
3
Spreader bar for lifting gyro
1
Mechanical
4
Hose clamps for seawater plumbing to 3/4" (19 mm) hose
barb (2 per hose barb)
4
3
Cooling
5
M6 terminal lug for grounding gyro at rear brace
1
2.3.1
Electrical
6
Cable, 4AWG, for grounding gyro at rear brace to vessel
ground (used with item 5)
AR
2.3.1
Dwg 90310
Electrical
7
Sea water pump, 230V AC
1
2.2.3
Electrical
8
Relay for sea water pump control (Not required if using
230V AC pump)
1
2.2.3
Electrical
AR = As Required
Dwg = Drawing