OPERATION
MANUAL
Product: Document #: Rev: Page:
SEAKEEPER 3 90379 1 8 of 10
Section 2: SYSTEM OPERATION
If it is necessary to shutoff power to the flywheel motor
and slow the flywheel for any reason, press Seakeeper
On/Off button; the button will turn grey and the stabilize
button will disappear indicating the command has been
accepted. It takes approximately 8+ hours for the speed
to drop to zero rpm.
If it is necessary to stop Seakeeper motion for any reason
press the stabilize button. The stabilize button will turn
grey indicating that the Seakeeper is locked. Never
attempt to work on the Seakeeper until the flywheel has
stopped spinning. In the event that the brake system has
automatically locked the Seakeeper due to an alarm or
failure, no attempt should be made to bypass the alarm
or automatic lock.
!
!
To Next Page
Loading...
