Seakeeper 5 GYRO - Page 7

OPERATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 5 GYRO
90246
4
3 of 8
Section 1: SYSTEM OVERVIEW
There is a large torque about the gimbal axis when the gyro is precessing. Gyro
cover panels are provided to prevent personnel or equipment from contacting the
gyro while it is in operation. These covers should not be stood on, or have anything
placed on top. The covers should always be in place during operation. If it is ever
necessary to touch the gyro while the flywheel is spinning, the gyro must be locked
at the display to stop the gyro from precessing. Gyro maintenance should not be
attempted unless the gyro is locked and the flywheel has stopped spinning.